The complete kiosk printing solution available in modular or open frame formats

High Speed, cost efficient 150mm/second quality thermal barcode, receipt, ticket and A4 kiosk printing solution for 80mm to 112mm formats up to 150gms / 0.15mm thickness.
    That is equal to print half of A4 in just 3.5seconds!

Mulit-position adjustable near end paper sensor with 80cm of cable for use with the high capacity paper roll supply option

Adjustable horizontal or vertical mounted control panel with extended cable lengths

A4 to A6 automatic scalable raster driver for reduced, legible A4 or internet output on 112mm wide paper

Two colour output when required with comparable running costs to other technologies - red/black, blue/black & green/black

TUP992 options include:
   - 25cm / 10" paper roll holder (15cm standard)
   - Choice of interfaces, including USB and Ethernet
   - PS60 power supply

The TUP900 Series of component parts are also available for greater flexibility
   - TMP942 mechanism with cabling and cutter
   - PR900 slim line presenter
   - TBD900 Control Logic Board
   - PNE Sensor
   - PBD-9 Power board
   - For other parts, pls contact

Mechanism - TMP942 & Cutter
Printer Method	Direct Thermal Line Printing
Print Speed	Up to 150mm per second
Top Margin	15mm (3mm selectable)
Print Resolution	8 X 8 dots/ mm (203 dpi)
Motor Torque	150gf or less
Paper Feed Speed	150mm /sec
Paper Loading	Semi Automatic
Paper Specifications Width Media 2 color pritning Thinkness Roll Diameter	Min. 80mm to Max. 112mm Thermal Paper Rolls Special thermal paper required 65g/m² ~150g/m²/ 0.065~0.15mm 15cm /6" standard with 25cm /10" option (RHU-t900)
Paper Sensor	Black mark   Paper End   Paper low sensors as standard
Autocutter	Full or partical cut (Guillotine) Full cut only with Presenter PR900 and TUP992
Autocutter Life	Up to 1 millions cuts
Reliability	37 Million Lines MCBF
Control Board TBD900
Flash ROM / SRAM	2 X 8 Mbits plus 4 Mbit static RAM
Logo store	4Mbits
Emulations	Star line & page Mode   ESC.POS™
Code pages	Star mode = 40   ESC/POS™ mode = 6&1 blank
Barcode	UPC-A      UPC-E      JAN/EAN-8   JAN/EAN-13   ITF CODE39   CODE93   CODE128      CODABAR (NW-7) PDF417
Driver	Windows 95 / 98 / ME / 2000™ , XP™ , NT4.0™ Linux CUPS Support™    Apple MAC™    OPOS™ JavaPOS™ Star Raster Driver
Presenter Uint-PR900
Driving Motor	1 DC motor
Paper Loop	Upper side loop
Eject Speed	300mm/sec
Paper Thickness	65g/m² ~150mg/m² 0.065~.015mm
Paper Lenght	75mm to 300mm
Paper width	80mm to 112mm
Sensor	3 paper sensors includng presenter and document capture counter
Life	1 Million receipt
Interface Board
Interfaces available	Parallel   Serial RS232C   USB 9-Pin Serial RS232C   Ethernet
Power supply - PS60
Supply Voltage Input Voltage	24V DC 100V (-10%) to 240V (+10%)
TUP992 Open Frame System
Overall Dimensions	192 (W) x 249.3 (D) x 179 (H) mm   2.84Kg
Printing Solution	All specifications for each module apply

    

	TUP900 Attaching the Shaft and Adjusting the Loop Guide Manual (145KB)
	TUP900 Mounting the Assist Guide Manual (149KB)
	TUP900 Optional RHU-T900 Manual (699KB)

	Line Mode Programming Manual (2.59MB)
	Page Mode Programming Manual (990KB)